Perform a Lab test with LaMotte Spin

Modified on Wed, 15 Nov, 2023 at 1:26 PM


  1. Select a pool, then click the test water icon to the right of the pool info or click on the pool and select Test Water.
  2. Select the sanitiser type from the drop down box by clicking the drop down arrow.
  3. Select the disk type from the drop down box by clicking the drop down arrow.
  4. If additional chemical tests are required, other than what is displayed, click + Add chemical tests and select the additional tests required.
  5. Insert the spin disk filled with a pool water sample into the spin device.
  6. Click Run Spin Touch.
  7. After the test is completed, check results*
  8. Add observation tests if required, by clicking on the observation box  and selecting the relevant observation.
  9. Scroll down to check recommendations.
  10. Click the Select dosage group drop down box to change product recommendation, if required, this will change the recommended product and customer action.
  11. Click the Customer action box to edit the action, if required.
  12. Turn off Show on the report tab if recommendation is not required on the water test report.
  13. Click Generate report at the top right of screen to view, print, save as pdf or email water test report. 



You can view any previous test history by clicking the blue clocks.


*You can view the ranges for each test, by hovering on the test box.
You can view any previous history by clicking the blue clocks



Help: Setup Spin


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article